Sabtu, 03 Mei 2008

Adjusment Program Epson C58 dan C79

Kalau ada yang butuh adjusment program C58 dan C79 bisa download disini

Adjustment C58

Adjustment C79

Epson R270 Waste Ink Counter Reset

Please read carefuly following instructions in order to run this program without problems. You have Windows XP to be installed on your PC. Don’t run the program until change your PC Date to Jan 18 2007

Download Adjustment Program for Epson R270

Waste Ink Counter reset

  • run AdjProg.exe for Epson R270
  • Click Accept button, choose Particular Adjustment Mode
  • select waste Ink pad counter , Ok
  • check, initialization, ok
  • Turn off printer

Epson C79 Counter Reset

Please read carefuly following instructions in order
to run this program without problems:

You have Windows XP to be installed on your PC.

DON’T RUN THE PROGRAM UNTIL!

  1. Download Adjustment program
  2. Change your PC Date to November 10, 2006.
  3. Delete the folder C:\Adjustments_Programs\ on your PC if it exists.
  4. Reboot your PC.
  5. Check properties of this file. There must be CREATION DATE - Nov.10.2006.
  6. If it is - it’s ok! If NO - try to do this one more time.
  7. UNZIP file C79eap.zip.
  8. RUN AdjProg.exe file. Here is it!

To reset waste ink counter;

  • choose Particular adjustment mode
  • Maintenance
  • Waste ink pad counter
  • Check
  • Initialization

That’ all!

Epson C90 Resetter

Reset Waste Ink pad Counter Epson Stylus C90

Please read carefuly following instructions in order
to run this program without problems:

You have Windows XP to be installed on your PC.

DON’T RUN THE PROGRAM UNTIL!

  1. Download Adjustment Program for Epson C90
  2. Change your PC Date to Jul 24 2007
  3. Delete the folder C:\Adjustments_Programs\ on your PC if it exists.
  4. Reboot your PC.
  5. UNZIP file C90.rar.
  6. RUN AdjProg.exe file. Here is it!

to Reset Waste Ink Counter

  • RUN AdjProg.exe file Epson C90
  • choose Particular adjustment mode
  • select waste Ink pad counter
  • Klikinitialization

That’ all! :D

Resetter Epson C58

  1. Download shoftware for epson c58
  2. Change your setting PC DATE to Nov 9 2006
  3. Delete the folder C:\Adjustments_Programs\ on your PC if it exists.
  4. Reboot your PC.
  5. Just copy it and place to C:\c58\ folder for example.
  6. UNZIP file C58.rar
  7. RUN AdjProg.exe file. Here is it!

Reset waste ink pad counter

  • choose Particular adjustment mode
  • Maintenance
  • Waste ink pad counter
  • Check
  • Initialization

That’ all!

Enjoy!!!

Resetter Epson C67

  1. Download shoftware for epson c67
  2. Change your setting PC DATE to Mar 1 2006
  3. Reboot your PC.
  4. UNZIP file C67.rar
  5. RUN AdjProg.exe file. Here is it!

To reset waste ink counter

  • choose Particular adjustment mode
  • Maintenance
  • Waste ink pad counter
  • Check
  • Initialization

Epson Printer C45 Resetter

Waste ink counter Epson C41, C42, C43, C43, C44, C45, C56 and ME1

  • Download Software
  • UNZIP file C4146.rar
  • RUN AdjProg.exe file
  • Select Printer Type, Ok
  • Click Maintenance Tab
  • Check Protection counter, Clearing protection counter
  • Ok, Ok
  • done

Reset Counter C340/C350 Epson Printer

This program can be used with following conditions:
  1. Download this program
  2. Change the date on your PC to February 1 2007.
  3. Run the program. It will give Expired Program message.
  4. Exit program.
  5. Delete the folder - C:/Adjustment Programs/ on your PC.
  6. Run the program. It has to work perfectly this time!

ATTENTION!
After Feb 22, 2007 the program has been expired,
but you can RUN it using instructions at the UP of the page.

Epson 2200 Reset Procedure

  1. Turn off the printer power and unplug the power cord from the wall. Disconnect the computer interface cable at the back of the printer.
  2. After one minute reattach the power plug to the wall, but don’t reattach the computer cable.
  3. Hold down the ROLL and the PAPER ADVANCE buttons simultaneously.
  4. Turn the printer on. after 2 blinks, all the ink lights come on, then release the buttons being held down.
  5. Press and hold the ROLL button for 10 seconds.
  6. Release the ROLL button and the printer will initialize, which resets the Waste Ink Pad Counter.
  7. Once initialization is complete, turn the printer power off.
  8. Reconnect the interface cable.
  9. Turn the printer on and print a document.

Epson R200, R210, R300, R310 Waste Ink Counter Pad Reset

Here is how to reset the waste counter for the Epson R200, R210, R300 and R310 printers.
  • Press and hold “Stop”, “Maintenance”, and “Power” buttons for about 10 seconds. A message will come on the screen saying counter is reset and to turn the printer off. The R200 and others don’t have a screen so just wait until the 10 seconds is up.
  • Turn the printer off, unplug the power cord. Wait about 1 minute and power the printer back up. The counter will be reset. That’s all there is to the reset procedure.

Is the waste pad full ?

If the waste pad is actually full and ink is about to overflow, then you need to install a waste container. You can see the waste pad by opening the access panel on the back of the printer.

Changing the waste pad requires almost complete disassembly of the printer, it is a big job. There is an easier way.

Open the access panel on the rear of the printer (remove screw) and look inside carefullly with a flashlight. You will see a tube (down and to your left) coming from the cleaning pump and it will have an open end on it. This is the tube that delivers ink to the waste pad.

Use a piece of coathanger wire or equivalent, and fish out this piece of tube. Bring it to the outside of the printer, thru the access panel.

Find yourself a suitable container (Tupperware or a plastic cup or jar) that is not too tall. Put the tube into this container and secure the tube and container so they won’t come apart or lose connection if the printer is moved.

If you wish you can make a hole or notch in the access panel cover so it can be replaced.

Now the ink will go into this container and not into the waste pad inside the printer. If it gets full, dump it.

Note: This information and a couple of photos are also available on Steve’s Digicam Forum (http://stevesforums.com/forums). Goto Printers-Photo Inkjet-Epson R200-210 & R300-310 Mod

To Download Software Resetter for Epson R300-310 cliks here : Download

Epson Stylus Pro 4000 Waste Ink Counter Reset

  1. While Powering up the printer, hold down the the left arrow, down arrow, and Up arrow buttons
  2. You will get a “Self Testing” message.
  3. Use the Up Arrow button to select the “Clear Counters” menu.
  4. Press the right arrow button (the Menu button).
  5. Scroll through with the up/down arrows to select “Maint Tank”
  6. Select with the right arrow and execute with the right arrow
  7. Turn your printer off then turn it back on

Epson Stylus Pro 7600/9600 Counter Reset

  • Power off your printer
  • press PAPER SOURCE+PAPER FEED+CUT/EJECT buttons at the same time and keep them pressed
  • turn on the printer
  • Release the buttons
  • A hidden menu appears
  • press DOWN, “CLEAR COUNTERS” option should appear
  • press RIGHT
  • press UP, “MAINT TANK” should appear
  • press RIGHT
  • press ENTER (CUT/EJECT button)
  • Power off printer.

Protected: Resetting Epson 9000’s

Resetting the 9000’s waste ink counter (to cure the 00000100 error code)
  • Press these three buttons while turning on the printer;
    Paper Source, Paper Feed - (not +), Cut/Eject.
  • The LCD panel reads : INIT. ALL=EXEC.
  • Push the Paper Source button 9 times.
    The LCD panel reads : INIT. WA. INK=EXEC.
  • Press Cut/Eject button to enter.
    All lights on the printer control panel will turn on then back to normal.
  • Turn off the printer.

That’s it.

Epson R220/R230 Software Resetter

Adjustment program for Epson R220 and R230 available here.

Download AdjustmentProgram for Epson R220/R230

EPSON Stylus Photo 750 1200 Resetter

To reset waste ink counter, use the following combination of applications and sequence of buttons on the control panel

  1. Turn off the printer.
  2. Hold buttons simultaneously LOAD/EJECT and click CLEANING POWER (LED flashes lack of paper).
  3. Release all the buttons.
  4. Within 2 seconds until the LED flashes, press and release the button LOAD/EJECT.
  5. Turn off and turn it on.


EPSON Stylus Photo 750 Resetter

To reset Waste Ink Counter, use the following combination of applications and sequence of buttons on the control panel:
  1. Substitute waste ink pad.
  2. Turn off the printer.
  3. Hold buttons simultaneously LOAD/EJECT and click CLEANING POWER (LED flashes lack of paper)
  4. Release all the buttons.
  5. Within 2 seconds until the LED flashes, press and release the button LOAD/EJECT
  6. Turn off and turn it on.

Filling and Refilling Epson T0781-T0786 refillable ink jet cartridges

Our how-to guide shows the easy fill process of the T0781, T0782, T0783, T0784, T0785 & T0786 ink jet cartridges. Also covers information about the ARC (auto-reset chips) and refilling information.Instructions on Filling & Refilling Epson Compatible T781, T0782, T0783, T0784, T0785 & T0786 ink jet cartridges with ARC (auto-reset chips).

The refillable cartridges for T0781, T0782, T0783, T0784, T0785 & T0786 contain an auto-reset chip. Once ink level falls to a predetermined level the chip automatically resets to near full capacity.Cartridges have a 10+ml capacity per cartridge.

These cartridges are of a 2 plug design, but not pressure filled as previous 2P cartridges were.One plug is used as a fill hole while the other is a vent plug. The image on the right shows the two plug locations.

Filling & Refilling:

  • Remove clear rubber fill hole plug

  • Fill injector with desired color ink.

  • Insert injector needle into cartridge

  • Slowly inject ink. Make sure you do not push needle all the way to the hub (yellow plastic portion of needle.) Inject ink slowly

  • When completed injecting ink replace original clear fill hole plug.

That is it. Cartridge has now been filled and is ready for use.Though the image to the right shows the cartridge laying on it side this is not recommended. It was taken this way to show the ink in the cartridge. Always keep cartridge upright.

Before attempting to use any cartridge make sure you have ALL cartridges filled.Cartridges do not work independently. The printer will show an error message of only one - five refillable cartridges are installed.

Replace any cartridges already in the printer with a complete set of refillable cartridges.
Once all cartridge have been inserted remove the vent hole plug from the cartridge.The vent hole plug is the color plug. On the image to the right the two leftmost cartridge plugs have been removed.

After removing all six plugs hit the ink cartridge button.Printer will begin to run an initial cartridge prime, the same as when any new cartridge is installed.After prime has been completed run a print test.

IMPORTANT INFORMATION

As with the OEM cartridges, refillable cartridges may not appear on the Epson Print Status window at all times. (image on right). If you open your printer properties window you can see the current status of the ink levels.(image on left of picture). This usually only occurs when running multiple print job without breaks in between.

Once a break in the print occurs your ink level will appear in the Print Status window once again.The ink level not appearing in the Status window is not an aftermarket related issue, but a printer related issue. This occurs on both OEM cartridges as well as aftermarket.

Never install less than 6 refillable cartridges at one time. Printer will not recognize the Epson cartridges when one of the refillable are installed.

Cartridge Chip auto-reset

These cartridges will reset automatically. There is no hitting cartridge change button or turning printer on and off required. Cartridge will all auto-reset at same time. It is advised that all cartridges be refilled at this time to prevent any cartridge running out of ink.Some cartridge may contain a good deal more ink than others depending on the first cartridge that requires reset. In most cases this is black. (under testing of 5 sets using of cartridges on 1 each R260, R380 & RX580).

Refilling

After initial fill when you are ready to refill return allplugs back to cartridge. Remove cartridges from printer and repeat fill process. There is no difference in refill from the initial fill.

Epson Chips Resetter for Free

The No Cost Solution to resetting your Epson Chips on a variety of Epson Stylus Color and Stylus Color Photo Printers. Yes, there is software out there that will allow you to reset your Epson Chip printers.

Before we go and give you the link we first want you to understand a few things:

  1. This software is a very poweful piece of software and should not be used without first reading the accompanied instructions. Read all documentation before using.
  2. We have no stake in this software and there is no finacial benefit for our recommending it. We do recommend it because it is out there and works . We are in the ink business, not the chip reset business. Any way we can make it easier for you to refill benefits us greatly
  3. Due to some recent architecure changes in chip design some printers can not have their chip reset with the software, but the software will allow you to store the values of a full status. If this alternative does not fufill your needs we do have available chip resetters by in our store as well as auto-reset chips.

Below the link to SSC service utility home pageis a list of updates and supported printers. The level of supported printers varies dependingon the type of chip used on the cartridge & printer firmware.

SSC Service Utility

Latest version updates:
New in 4.20:

  • support for CX4200/CX4700/CX4800/DX4200/DX4800
  • support for C47/C48- support for RX430- support for CX6500/CX6300
  • improved support for CX6400/CX6600
  • improved support for RX500/RX510- improved support for RX600/RX610
  • improved support for R1800
  • improved support for CX3700/CX3800/DX3800/DX3850
  • improved support for C67/C68/D68
  • improved support for C87/C88/D88
  • many new chip models supported- some other improvements and bug fixes

New in 4.10:

  • support for PM-970C
  • support for PictureMate
  • support for RX700
  • support for R2400
  • support for PM-A700
  • support for PM-G720
  • support for RX520
  • support for CX7800
  • support for CX4100
  • support for DX3800
  • support for CX3800/CX3810
  • support for CX3700
  • support for C67/68 and Photo Editions
  • support for C87/C88/D88 and Photo Editions
  • support for R220/R230
  • support for R320
  • support for CX4500
  • support for CX3650
  • various bug fixes

New in 4.00:

  • ability to work with additional reset device-
  • support for CX4600
  • support for CX5300
  • support for CX5100
  • support for RX420
  • support for RX425
  • support for RX620
  • support for R1800
  • improved support for almost all other printers
  • improved ink freezer
  • improved ink monitor, implemented status information
  • protection counter reset improvements
  • various bug fixes

Supported printer list:

  • Epson Stylus Color 400
  • Epson Stylus Color 440,
  • Epson Stylus Color 480 LPT,
  • Epson Stylus Color 480SXU / 580,
  • Epson Stylus Color 600,
  • Epson Stylus Color 640
  • Epson Stylus Color 660
  • Epson Stylus Color 670
  • Epson Stylus Color 680 / 777
  • Epson Stylus Color 740
  • Epson Stylus Color 760
  • Epson Stylus Color 800 / 850
  • Epson Stylus Color 860
  • Epson Stylus Color 880
  • Epson Stylus Color 900 / EM-900C
  • Epson Stylus Color 980
  • Epson Stylus Color 1160
  • Epson Stylus Color 1520
  • Epson Stylus Color 3000
  • Epson Stylus C20 / C40 / CL-750
  • Epson Stylus C41 / C42 / C43 / C44 / C45 / C46 / C47 / C48
  • Epson Stylus C50
  • Epson Stylus C60
  • Epson Stylus C61 / C62
  • Epson Stylus C63 / C64
  • Epson Stylus C65 / C66 and PE
  • Epson Stylus C67 / C68 / D68 and PE
  • Epson Stylus C70
  • Epson Stylus C80
  • Epson Stylus C82
  • Epson Stylus C83 / C84
  • Epson Stylus C85 / C86 and PE
  • Epson Stylus C87 / C88 / D88 and PE
  • Epson Stylus Photo RX420 / RX425 / RX430
  • Epson Stylus Photo RX500 / RX510
  • Epson Stylus Photo RX520
  • Epson Stylus Photo RX600 / RX610
  • Epson Stylus Photo RX620
  • Epson Stylus Photo RX700
  • Epson Stylus CX3100 / CX3200
  • Epson Stylus CX3500 / CX3600 / CX3650
  • Epson Stylus CX3700
  • Epson Stylus CX3800 / CX3810 / DX3800
  • Epson Stylus CX4500
  • Epson Stylus CX4600
  • Epson Stylus CX4100 / CX4200
  • Epson Stylus CX4700 / CX4800
  • Epson Stylus DX4200 / DX4800
  • Epson Stylus CX5100 / CX5200
  • Epson Stylus CX5300 / CX5400
  • Epson Stylus CX6400 / CX6600
  • Epson Stylus CX6300 / CX6500
  • Epson Stylus CX7800
  • Epson PictureMate
  • Epson Stylus Photo
  • Epson Stylus Photo EX
  • Epson Stylus Photo 700 / IP-100
  • Epson Stylus Photo 750 / PM-770C
  • Epson Stylus Photo 780 / 790 / PM-780C
  • Epson Stylus Photo 810 / 820
  • Epson Stylus Photo 820
  • Epson Stylus Photo 825 / 915
  • Epson Stylus Photo 830 / 830U
  • Epson Stylus Photo 870 / PM-875DC
  • Epson Stylus Photo R200 / R210
  • Epson Stylus Photo R220 / R230
  • Epson Stylus Photo R300 / R310
  • Epson Stylus Photo R320
  • Epson Stylus Photo R800 / PX-G900
  • Epson Stylus Photo R1800
  • Epson Stylus Photo R2400
  • Epson Stylus Photo 890
  • Epson Stylus Photo PM-890C
  • Epson Stylus Photo PM-A700
  • Epson Stylus Photo PM-G720
  • Epson Stylus Photo PM-970C
  • Epson Stylus Photo 895/ 785EPX
  • Epson Stylus Photo 900
  • Epson Stylus Photo 925 / 935
  • Epson Stylus Photo 950 / 960 / PM-950C
  • Epson Stylus Photo 1200 / PM-3000C
  • Epson Stylus Photo 1270 / PM-3300C
  • Epson Stylus Photo 1280 / PM-3500C
  • Epson Stylus Photo 1290
  • Epson Stylus Photo 2000P
  • Epson Stylus Photo 2100
  • Epson Stylus Photo 2200 / PM-4000EPX
  • Epson Stylus Pro 5000 / PM-5000C

Reset Counter Epson RX650

Here this step to Reset Waste Ink Counter Printer Epson RX650

  1. Switch on printer
  2. Set the pc date setting to 13 february 2007
  3. Run adjprog.exe from the extracted folder
  4. Click accept
  5. Click particular adjustment mode
  6. Go to maintenance then Select waste ink pad counter then click ok
  7. Click on “check button till its done then click on initialization button then click on finish button
  8. Switch off printer for 5 secs then switch on again
  9. After you reset succesfully, you can change the date back to normal

Download Resetter Printer Epson RX650

Epson R390 Waste Ink Counter Reset

  1. Turn on the printer
  2. Set the pc date setting to 1 January 2007
  3. Adjprog.exe run from the extract of a folder (or locate the file or application. Exe and run it)
  4. Click accept
  5. Click on the particular mode adjustment
  6. Go to interview Then select waste ink pad counter then click ok
  7. Click “button box” until it is done then click “initialization” button and then click “finish button”
  8. Turn off the printer for 5secs then turn again
  9. Set the date today.

Download Resetter Printer Epson R390

Waste Ink Counter Reset Epson cx3900

Here this step to reset Counter printer epson cx3900

  1. Switch on printer
  2. Set the computer date setting date to 23 january 2007
  3. Run adjprog.exe from the extracted folder
  4. Click accept
  5. Click particular adjustment mode
  6. Go to maintenance then Select waste ink pad counter then click ok
  7. Click on “check button” till its done then click on “initialization button” then click on “finish button”
  8. Switch off printer for 5secs then switch on again
  9. After you reset succesfully, you can change the date back to normal

Epson Printer R240 R245 R250 Resetter

Here this step to Reset Waste Ink Counter Printer Epson R240 - R245 - R250

  1. Download Adjustment for Printer Epson R240 - R245 - R250
  2. Switch on printer
  3. Set the PC date setting to 15 February 2006
  4. Run adjprog.exe from the extracted folder
  5. Click accept
  6. Click particular adjustment mode
  7. Go to maintenance then Select waste ink pad counter then click ok
  8. Click on “check button till its done then click on initialization button then click on finish button
  9. Switch off printer for 5 secs then switch on again
  10. After you reset succesfully
  11. you can change the date back to normal

Reset Protection Counter All Epson Printer

1. Open SSC Service Utility
2. Equalize configuraton of ssc with configuraton of printer.
3. Right Click SSC icon in the taskbar
4. Select Protection counter
5. Choose Reset counter protection
6. Confirmation
7. Done..

Resetter Printer Epson / Adjustment Printer Epson

 
| Manual Online | Laptop Repair