Resetter Printer Epson

Adjusment Program Epson C58 dan C79

2008-05-03T09:45:00.001-07:00

Kalau ada yang butuh adjusment program C58 dan C79 bisa download disini

Epson R270 Waste Ink Counter Reset

2008-05-03T09:44:00.002-07:00

Please read carefuly following instructions in order to run this program without problems. You have Windows XP to be installed on your PC. Don’t run the program until change your PC Date to Jan 18 2007

Download Adjustment Program for Epson R270

Waste Ink Counter reset

run AdjProg.exe for Epson R270
Click Accept button, choose Particular Adjustment Mode
select waste Ink pad counter , Ok
check, initialization, ok
Turn off printer

Epson C79 Counter Reset

2008-05-03T09:43:00.002-07:00

Please read carefuly following instructions in order
to run this program without problems:

You have Windows XP to be installed on your PC.

DON’T RUN THE PROGRAM UNTIL!

Download Adjustment program
Change your PC Date to November 10, 2006.
Delete the folder C:\Adjustments_Programs\ on your PC if it exists.
Reboot your PC.
Check properties of this file. There must be CREATION DATE - Nov.10.2006.
If it is - it’s ok! If NO - try to do this one more time.
UNZIP file C79eap.zip.
RUN AdjProg.exe file. Here is it!

To reset waste ink counter;

choose Particular adjustment mode
Maintenance
Waste ink pad counter
Check
Initialization

That’ all!

Epson C90 Resetter

2008-05-03T09:43:00.001-07:00

Reset Waste Ink pad Counter Epson Stylus C90

Please read carefuly following instructions in order
to run this program without problems:

You have Windows XP to be installed on your PC.

DON’T RUN THE PROGRAM UNTIL!

Download Adjustment Program for Epson C90
Change your PC Date to Jul 24 2007
Delete the folder C:\Adjustments_Programs\ on your PC if it exists.
Reboot your PC.
UNZIP file C90.rar.
RUN AdjProg.exe file. Here is it!

to Reset Waste Ink Counter

RUN AdjProg.exe file Epson C90
choose Particular adjustment mode
select waste Ink pad counter
Klikinitialization

That’ all!

Resetter Epson C58

2008-05-03T09:42:00.001-07:00

Download shoftware for epson c58
Change your setting PC DATE to Nov 9 2006
Delete the folder C:\Adjustments_Programs\ on your PC if it exists.
Reboot your PC.
Just copy it and place to C:\c58\ folder for example.
UNZIP file C58.rar
RUN AdjProg.exe file. Here is it!

Reset waste ink pad counter

choose Particular adjustment mode
Maintenance
Waste ink pad counter
Check
Initialization

That’ all!

Enjoy!!!

Resetter Epson C67

2008-05-03T09:41:00.002-07:00

Download shoftware for epson c67
Change your setting PC DATE to Mar 1 2006
Reboot your PC.
UNZIP file C67.rar
RUN AdjProg.exe file. Here is it!

To reset waste ink counter

choose Particular adjustment mode
Maintenance
Waste ink pad counter
Check
Initialization

Epson Printer C45 Resetter

2008-05-03T09:41:00.001-07:00

Waste ink counter Epson C41, C42, C43, C43, C44, C45, C56 and ME1

Download Software
UNZIP file C4146.rar
RUN AdjProg.exe file
Select Printer Type, Ok
Click Maintenance Tab
Check Protection counter, Clearing protection counter
Ok, Ok
done

Reset Counter C340/C350 Epson Printer

2008-05-03T09:40:00.002-07:00

This program can be used with following conditions:

Download this program
Change the date on your PC to February 1 2007.
Run the program. It will give Expired Program message.
Exit program.
Delete the folder - C:/Adjustment Programs/ on your PC.
Run the program. It has to work perfectly this time!

ATTENTION!
After Feb 22, 2007 the program has been expired,
but you can RUN it using instructions at the UP of the page.

Epson 2200 Reset Procedure

2008-05-03T09:40:00.001-07:00

Turn off the printer power and unplug the power cord from the wall. Disconnect the computer interface cable at the back of the printer.
After one minute reattach the power plug to the wall, but don’t reattach the computer cable.
Hold down the ROLL and the PAPER ADVANCE buttons simultaneously.
Turn the printer on. after 2 blinks, all the ink lights come on, then release the buttons being held down.
Press and hold the ROLL button for 10 seconds.
Release the ROLL button and the printer will initialize, which resets the Waste Ink Pad Counter.
Once initialization is complete, turn the printer power off.
Reconnect the interface cable.
Turn the printer on and print a document.

Epson R200, R210, R300, R310 Waste Ink Counter Pad Reset

2008-05-03T09:39:00.003-07:00

Here is how to reset the waste counter for the Epson R200, R210, R300 and R310 printers.

Press and hold “Stop”, “Maintenance”, and “Power” buttons for about 10 seconds. A message will come on the screen saying counter is reset and to turn the printer off. The R200 and others don’t have a screen so just wait until the 10 seconds is up.
Turn the printer off, unplug the power cord. Wait about 1 minute and power the printer back up. The counter will be reset. That’s all there is to the reset procedure.

Is the waste pad full ?

If the waste pad is actually full and ink is about to overflow, then you need to install a waste container. You can see the waste pad by opening the access panel on the back of the printer.

Changing the waste pad requires almost complete disassembly of the printer, it is a big job. There is an easier way.

Open the access panel on the rear of the printer (remove screw) and look inside carefullly with a flashlight. You will see a tube (down and to your left) coming from the cleaning pump and it will have an open end on it. This is the tube that delivers ink to the waste pad.

Use a piece of coathanger wire or equivalent, and fish out this piece of tube. Bring it to the outside of the printer, thru the access panel.

Find yourself a suitable container (Tupperware or a plastic cup or jar) that is not too tall. Put the tube into this container and secure the tube and container so they won’t come apart or lose connection if the printer is moved.

If you wish you can make a hole or notch in the access panel cover so it can be replaced.

Now the ink will go into this container and not into the waste pad inside the printer. If it gets full, dump it.

Note: This information and a couple of photos are also available on Steve’s Digicam Forum (http://stevesforums.com/forums). Goto Printers-Photo Inkjet-Epson R200-210 & R300-310 Mod

To Download Software Resetter for Epson R300-310 cliks here : Download

Epson Stylus Pro 4000 Waste Ink Counter Reset

2008-05-03T09:39:00.001-07:00

While Powering up the printer, hold down the the left arrow, down arrow, and Up arrow buttons
You will get a “Self Testing” message.
Use the Up Arrow button to select the “Clear Counters” menu.
Press the right arrow button (the Menu button).
Scroll through with the up/down arrows to select “Maint Tank”
Select with the right arrow and execute with the right arrow
Turn your printer off then turn it back on

Epson Stylus Pro 7600/9600 Counter Reset

2008-05-03T09:38:00.002-07:00

Power off your printer
press PAPER SOURCE+PAPER FEED+CUT/EJECT buttons at the same time and keep them pressed
turn on the printer
Release the buttons
A hidden menu appears
press DOWN, “CLEAR COUNTERS” option should appear
press RIGHT
press UP, “MAINT TANK” should appear
press RIGHT
press ENTER (CUT/EJECT button)
Power off printer.

Protected: Resetting Epson 9000’s

2008-05-03T09:38:00.001-07:00

Resetting the 9000’s waste ink counter (to cure the 00000100 error code)

Press these three buttons while turning on the printer;
Paper Source, Paper Feed - (not +), Cut/Eject.
The LCD panel reads : INIT. ALL=EXEC.
Push the Paper Source button 9 times.
The LCD panel reads : INIT. WA. INK=EXEC.
Press Cut/Eject button to enter.
All lights on the printer control panel will turn on then back to normal.
Turn off the printer.

That’s it.

Epson R220/R230 Software Resetter

2008-05-03T09:37:00.004-07:00

Adjustment program for Epson R220 and R230 available here.

Download AdjustmentProgram for Epson R220/R230

EPSON Stylus Photo 750 1200 Resetter

2008-05-03T09:37:00.003-07:00

To reset waste ink counter, use the following combination of applications and sequence of buttons on the control panel

Turn off the printer.
Hold buttons simultaneously LOAD/EJECT and click CLEANING POWER (LED flashes lack of paper).
Release all the buttons.
Within 2 seconds until the LED flashes, press and release the button LOAD/EJECT.
Turn off and turn it on.

EPSON Stylus Photo 750 Resetter

2008-05-03T09:37:00.001-07:00

To reset Waste Ink Counter, use the following combination of applications and sequence of buttons on the control panel:

Substitute waste ink pad.
Turn off the printer.
Hold buttons simultaneously LOAD/EJECT and click CLEANING POWER (LED flashes lack of paper)
Release all the buttons.
Within 2 seconds until the LED flashes, press and release the button LOAD/EJECT
Turn off and turn it on.

Filling and Refilling Epson T0781-T0786 refillable ink jet cartridges

2008-05-03T09:36:00.001-07:00

Our how-to guide shows the easy fill process of the T0781, T0782, T0783, T0784, T0785 & T0786 ink jet cartridges. Also covers information about the ARC (auto-reset chips) and refilling information.Instructions on Filling & Refilling Epson Compatible T781, T0782, T0783, T0784, T0785 & T0786 ink jet cartridges with ARC (auto-reset chips).

The refillable cartridges for T0781, T0782, T0783, T0784, T0785 & T0786 contain an auto-reset chip. Once ink level falls to a predetermined level the chip automatically resets to near full capacity.Cartridges have a 10+ml capacity per cartridge.

These cartridges are of a 2 plug design, but not pressure filled as previous 2P cartridges were.One plug is used as a fill hole while the other is a vent plug. The image on the right shows the two plug locations.

Filling & Refilling:

Remove clear rubber fill hole plug
Fill injector with desired color ink.
Insert injector needle into cartridge
Slowly inject ink. Make sure you do not push needle all the way to the hub (yellow plastic portion of needle.) Inject ink slowly
When completed injecting ink replace original clear fill hole plug.

That is it. Cartridge has now been filled and is ready for use.Though the image to the right shows the cartridge laying on it side this is not recommended. It was taken this way to show the ink in the cartridge. Always keep cartridge upright.

Before attempting to use any cartridge make sure you have ALL cartridges filled.Cartridges do not work independently. The printer will show an error message of only one - five refillable cartridges are installed.

Replace any cartridges already in the printer with a complete set of refillable cartridges.
Once all cartridge have been inserted remove the vent hole plug from the cartridge.The vent hole plug is the color plug. On the image to the right the two leftmost cartridge plugs have been removed.

After removing all six plugs hit the ink cartridge button.Printer will begin to run an initial cartridge prime, the same as when any new cartridge is installed.After prime has been completed run a print test.

IMPORTANT INFORMATION

As with the OEM cartridges, refillable cartridges may not appear on the Epson Print Status window at all times. (image on right). If you open your printer properties window you can see the current status of the ink levels.(image on left of picture). This usually only occurs when running multiple print job without breaks in between.

Once a break in the print occurs your ink level will appear in the Print Status window once again.The ink level not appearing in the Status window is not an aftermarket related issue, but a printer related issue. This occurs on both OEM cartridges as well as aftermarket.

Never install less than 6 refillable cartridges at one time. Printer will not recognize the Epson cartridges when one of the refillable are installed.

Cartridge Chip auto-reset

These cartridges will reset automatically. There is no hitting cartridge change button or turning printer on and off required. Cartridge will all auto-reset at same time. It is advised that all cartridges be refilled at this time to prevent any cartridge running out of ink.Some cartridge may contain a good deal more ink than others depending on the first cartridge that requires reset. In most cases this is black. (under testing of 5 sets using of cartridges on 1 each R260, R380 & RX580).

Refilling

After initial fill when you are ready to refill return allplugs back to cartridge. Remove cartridges from printer and repeat fill process. There is no difference in refill from the initial fill.

Epson Chips Resetter for Free

2008-05-03T09:35:00.000-07:00

The No Cost Solution to resetting your Epson Chips on a variety of Epson Stylus Color and Stylus Color Photo Printers. Yes, there is software out there that will allow you to reset your Epson Chip printers.

Before we go and give you the link we first want you to understand a few things:

This software is a very poweful piece of software and should not be used without first reading the accompanied instructions. Read all documentation before using.
We have no stake in this software and there is no finacial benefit for our recommending it. We do recommend it because it is out there and works . We are in the ink business, not the chip reset business. Any way we can make it easier for you to refill benefits us greatly
Due to some recent architecure changes in chip design some printers can not have their chip reset with the software, but the software will allow you to store the values of a full status. If this alternative does not fufill your needs we do have available chip resetters by in our store as well as auto-reset chips.

Below the link to SSC service utility home pageis a list of updates and supported printers. The level of supported printers varies dependingon the type of chip used on the cartridge & printer firmware.

SSC Service Utility

Latest version updates:
New in 4.20:

support for CX4200/CX4700/CX4800/DX4200/DX4800
support for C47/C48- support for RX430- support for CX6500/CX6300
improved support for CX6400/CX6600
improved support for RX500/RX510- improved support for RX600/RX610
improved support for R1800
improved support for CX3700/CX3800/DX3800/DX3850
improved support for C67/C68/D68
improved support for C87/C88/D88
many new chip models supported- some other improvements and bug fixes

New in 4.10:

support for PM-970C
support for PictureMate
support for RX700
support for R2400
support for PM-A700
support for PM-G720
support for RX520
support for CX7800
support for CX4100
support for DX3800
support for CX3800/CX3810
support for CX3700
support for C67/68 and Photo Editions
support for C87/C88/D88 and Photo Editions
support for R220/R230
support for R320
support for CX4500
support for CX3650
various bug fixes

New in 4.00:

ability to work with additional reset device-
support for CX4600
support for CX5300
support for CX5100
support for RX420
support for RX425
support for RX620
support for R1800
improved support for almost all other printers
improved ink freezer
improved ink monitor, implemented status information
protection counter reset improvements
various bug fixes

Supported printer list:

Epson Stylus Color 400
Epson Stylus Color 440,
Epson Stylus Color 480 LPT,
Epson Stylus Color 480SXU / 580,
Epson Stylus Color 600,
Epson Stylus Color 640
Epson Stylus Color 660
Epson Stylus Color 670
Epson Stylus Color 680 / 777
Epson Stylus Color 740
Epson Stylus Color 760
Epson Stylus Color 800 / 850
Epson Stylus Color 860
Epson Stylus Color 880
Epson Stylus Color 900 / EM-900C
Epson Stylus Color 980
Epson Stylus Color 1160
Epson Stylus Color 1520
Epson Stylus Color 3000
Epson Stylus C20 / C40 / CL-750
Epson Stylus C41 / C42 / C43 / C44 / C45 / C46 / C47 / C48
Epson Stylus C50
Epson Stylus C60
Epson Stylus C61 / C62
Epson Stylus C63 / C64
Epson Stylus C65 / C66 and PE
Epson Stylus C67 / C68 / D68 and PE
Epson Stylus C70
Epson Stylus C80
Epson Stylus C82
Epson Stylus C83 / C84
Epson Stylus C85 / C86 and PE
Epson Stylus C87 / C88 / D88 and PE
Epson Stylus Photo RX420 / RX425 / RX430
Epson Stylus Photo RX500 / RX510
Epson Stylus Photo RX520
Epson Stylus Photo RX600 / RX610
Epson Stylus Photo RX620
Epson Stylus Photo RX700
Epson Stylus CX3100 / CX3200
Epson Stylus CX3500 / CX3600 / CX3650
Epson Stylus CX3700
Epson Stylus CX3800 / CX3810 / DX3800
Epson Stylus CX4500
Epson Stylus CX4600
Epson Stylus CX4100 / CX4200
Epson Stylus CX4700 / CX4800
Epson Stylus DX4200 / DX4800
Epson Stylus CX5100 / CX5200
Epson Stylus CX5300 / CX5400
Epson Stylus CX6400 / CX6600
Epson Stylus CX6300 / CX6500
Epson Stylus CX7800
Epson PictureMate
Epson Stylus Photo
Epson Stylus Photo EX
Epson Stylus Photo 700 / IP-100
Epson Stylus Photo 750 / PM-770C
Epson Stylus Photo 780 / 790 / PM-780C
Epson Stylus Photo 810 / 820
Epson Stylus Photo 820
Epson Stylus Photo 825 / 915
Epson Stylus Photo 830 / 830U
Epson Stylus Photo 870 / PM-875DC
Epson Stylus Photo R200 / R210
Epson Stylus Photo R220 / R230
Epson Stylus Photo R300 / R310
Epson Stylus Photo R320
Epson Stylus Photo R800 / PX-G900
Epson Stylus Photo R1800
Epson Stylus Photo R2400
Epson Stylus Photo 890
Epson Stylus Photo PM-890C
Epson Stylus Photo PM-A700
Epson Stylus Photo PM-G720
Epson Stylus Photo PM-970C
Epson Stylus Photo 895/ 785EPX
Epson Stylus Photo 900
Epson Stylus Photo 925 / 935
Epson Stylus Photo 950 / 960 / PM-950C
Epson Stylus Photo 1200 / PM-3000C
Epson Stylus Photo 1270 / PM-3300C
Epson Stylus Photo 1280 / PM-3500C
Epson Stylus Photo 1290
Epson Stylus Photo 2000P
Epson Stylus Photo 2100
Epson Stylus Photo 2200 / PM-4000EPX
Epson Stylus Pro 5000 / PM-5000C

Reset Counter Epson RX650

2008-05-03T09:34:00.003-07:00

Here this step to Reset Waste Ink Counter Printer Epson RX650

Switch on printer
Set the pc date setting to 13 february 2007
Run adjprog.exe from the extracted folder
Click accept
Click particular adjustment mode
Go to maintenance then Select waste ink pad counter then click ok
Click on “check button till its done then click on initialization button then click on finish button
Switch off printer for 5 secs then switch on again
After you reset succesfully, you can change the date back to normal

Download Resetter Printer Epson RX650

Epson R390 Waste Ink Counter Reset

2008-05-03T09:34:00.001-07:00

Turn on the printer
Set the pc date setting to 1 January 2007
Adjprog.exe run from the extract of a folder (or locate the file or application. Exe and run it)
Click accept
Click on the particular mode adjustment
Go to interview Then select waste ink pad counter then click ok
Click “button box” until it is done then click “initialization” button and then click “finish button”
Turn off the printer for 5secs then turn again
Set the date today.

Download Resetter Printer Epson R390

Waste Ink Counter Reset Epson cx3900

2008-05-03T09:33:00.000-07:00

Here this step to reset Counter printer epson cx3900

Switch on printer
Set the computer date setting date to 23 january 2007
Run adjprog.exe from the extracted folder
Click accept
Click particular adjustment mode
Go to maintenance then Select waste ink pad counter then click ok
Click on “check button” till its done then click on “initialization button” then click on “finish button”
Switch off printer for 5secs then switch on again
After you reset succesfully, you can change the date back to normal

Epson Printer R240 R245 R250 Resetter

2008-05-03T09:32:00.000-07:00

Here this step to Reset Waste Ink Counter Printer Epson R240 - R245 - R250

Download Adjustment for Printer Epson R240 - R245 - R250
Switch on printer
Set the PC date setting to 15 February 2006
Run adjprog.exe from the extracted folder
Click accept
Click particular adjustment mode
Go to maintenance then Select waste ink pad counter then click ok
Click on “check button till its done then click on initialization button then click on finish button
Switch off printer for 5 secs then switch on again
After you reset succesfully
you can change the date back to normal

Reset Protection Counter All Epson Printer

2008-05-03T09:31:00.000-07:00

1. Open SSC Service Utility
2. Equalize configuraton of ssc with configuraton of printer.
3. Right Click SSC icon in the taskbar
4. Select Protection counter
5. Choose Reset counter protection
6. Confirmation
7. Done..

Resetter Printer Epson / Adjustment Printer Epson

2008-05-03T09:28:00.000-07:00